Accessories

PHONE ORDERS:
(02) 6628 1100

Payment options for phone orders

HARDWARE

Whatever your hardware requirement, give us a call. If we don't stock it we can probably get it.

		STEP SINGLE TREADPLATE HWCAM4065-001 455x 60mmMTG	$44.50
		STEP DOUBLE TREADPLATE HWCAM4065-025 490x180mmMTG	$120.00
		OMNI Manual 550 20205500 Omnistep Manual These steps are pulled out and pushed in by hand. More Details	$210.00
		OMNISTEP 12 Volt 550 20215500 Step is operated by a switch. Optional Relays - the step is retracted when starting the engine. ELECTRONIC KIT to have the step operate by door contact the step is also retracted when starting the engine. More Details	$384.00 $245.00
		OMNISTEP 12 Volt Double 500 HWAT20335000 Step is operated by a switch. OPTIONAL Relays - the step is retracted when starting the engine. ELECTRONIC KIT To have the step operate by door contact.The step is also retracted when starting the engine. More Details	$740.00 $235.00
		OMNI 12 Volt Slide Out 400 20224500 OMNI 12 Volt Slide Out 700 20227500 Step is operated by a switch. OPTIONAL Relays - the step is retracted when starting the engine. ELECTRONIC KIT to have the step operate by door contact the step is also retracted when starting the engine. More Details	$477.00 $630.00 $235.00
		Heavy duty drawer runner 160kg per set 422.22.506 500mm long 422.22.604 600mm long 422.22.702 700 mm long	$86.00 $90.00 $100.00
		Centaflex Continuous Hinge 2231/030 3m length Black finish ideal for vehicle side-locker applications. Only available in 3 metre length	$115.00
		Semi-Flush RecessHandle 9/00156 The equilateral design uses one, non-handed pan to suit both LH and RH applications. Supplied as boxed sets with die cast handles, these are suitable only for compartment doors carrying light loads - not for passenger vehicles.	$54.90
		Large Nylon Door Catches 33146 Specially designed for use on all types of vehicles using hinged and sliding doors: vans, floats, travelling shops, caravans, tractors and civil engineering vehicles and equipment.	$4.50
		Base Model Handles Large 44000 Base model A/HG8F front fixing locking. 44003 Base model A/HG8R rear fixing locking.	$16.50 $14.95
		Base Model Handle Small 44009 Base model A/HT8F front fixing locking. 44011 Base model A/HT8R rear fixing locking.	$14.00 $13.50
		Compartment Lock 44018	$9.50
		Compartment Lock 44019	$11.00
		Compartment Lock 44020	$13.00
		Left Handed Budget Latches UES421024 Cleverly designed for maximum strength. Bolt moves 90°, left or right handed. Fixing holes normally countersunk. Yellow zinc-plated.	$4.50
		Drop - T 3-way Latch System 9/01561/01 • As 9/01561, FS880. • Complete system, supplied with rods and guides. • Assembled and handed on site. • Stainless steel or zinc plated.	$75.00
		Paddles Slam-Bolt 9/00418 The Paddle concept provides an attractive, fully self-contained lock/latch, which is flush fitting and simple to install.	$55.00
		Utility slam latch 16mm bolt. 3/17332	$16.50
		Support Stays with Safety Catch Release This stay incorporates a safety catch: to operate, the stay is extended slightly and the catch released by hand.They are individually shaped. Length between fixing centres is 292mm (closed), 465mm (open) - not including brackets. 7/25621 Stay, 285/470mm, 2 brackets	$16.50
		Gas Stays Three common sizes in stock. Part No. F1/N A/mm B/mm C/mm D/mm L/mm Ball end 41060 400N 253 210 8 18 502 A201-B201 41130 600N 303 215 10 22 575 A129-B129 41095 450N 288 250 10 22 600 A129-B129 A huge range of alternatives available sizes on request.	$35.00 $51.00 $55.00
		Pinchweld mould with side sponge rubber 66-009	$ 8.00/m
		12 ton Squat Bottle Jack TOL60105	$ 112.00